Spring (Rear Shock Absorber) - Yamaha WR400F(M) Owner's Service Manual

REAR SHOCK ABSORBER
2. Install:
Stopper ring 1
NOTE:
After installing the stopper ring, push back the
bearing until it contacts the stopper ring.
EC585111

Spring (rear shock absorber)

1. Install:
Spring 1
Spring guide (upper) 2
Spring guide (lower) 3
2. Tighten:
Adjuster 1
3. Adjust:
Spring length (installed) a
Standard
245 mm (9.65 in)
*244 mm (9.61 in)
* For EUROPE
NOTE:
The length of the spring (installed) changes
1.5 mm (0.06 in) per turn of the adjuster.
CAUTION:
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
4. Tighten:
Locknut 1
5 - 62
CHAS
New
Spring length (installed) a:
length
242 ~ 260 mm
(9.53 ~ 10.24 in)
Extent of
adjustment