Yamaha WR400F(M) Owner's Service Manual page 154

1 Throttle cable
2 Lights switch
3 Lights switch lead
4 Clamp
5 Decompression cable
6 Clutch cable
7 Hose guide
8 Trip meter
9 Brake hose
0 "ENGINE STOP" button lead
CABLE ROUTING DIAGRAM
Å Fasten the "ENGINE STOP" button lead to the handlebar with the
plastic band.
ı Pass the decompression cable between the brake hose and clutch
cable.
Ç Pass the throttle cables between the handle crown and trip meter.
Î Pass the light switch leads behind the "ENGINE STOP" button lead,
then pass the head light lead (of the light switch leads) in front of the
head pipe.
‰ Install the trip meter cable so that its bent portion faces the chassis
rear.
Ï Install the brake hose so that it contacts the master cylinder projec-
tion and that its bent portion faces downward.
2 - 24
SPEC