Yamaha WR250F(N) Owner's Service Manual page 416

KICK SHAFT AND SHIFT SHAFT
EC4B5111
Stopper lever
NOTE:
Align the stopper lever roller with the slot on
segment.
Shift guide and shift lever assembly
NOTE:
Apply the engine oil on the spring, pawl pin
and pawl.
NOTE:
4 - 75
1. Install:
Torsion spring 1
Stopper lever 2
Bolt (stopper lever) 3
10 Nm (1.0 m · kg, 7.2 ft · lb)
1. Install:
Spring 1
Pawl pin 2
Pawl 3
To shift lever 4.
2. Install:
Shift lever assembly 1
To shift guide 2.
3. Install:
Shift lever assembly 1
Shift guide 2
The shift lever assembly is installed at the
same time as the shift guide.
Apply the engine oil on the bolt (segment)
shaft.
ENG