Table of Contents
Advertisement
CAMSHAFTS
Release the screwdriver, check the ten-
sioner rod to come out and tighten the
gasket 4 and the cap bolt 5 to the speci-
fied torque.
Tensioner cap bolt:
7 Nm (0.7 m • kg, 5.1 ft • lb)
3. Turn:
Crankshaft
Counterclockwise several turns
4. Check:
Rotor T.D.C. mark
Align with the crankcase align mark.
Camshaft match marks
Align with the cylinder head surface.
Out of alignment
5. Install:
Timing mark accessing screw 1
Crankshaft end accessing screw 2
6. Install:
Timing chain guide (top side) 1
Cylinder head cover gasket 2
Cylinder head cover 3
Bolt (cylinder head cover) 4
NOTE:
Apply the sealant on the cylinder head cover
gasket.
Quick gasket
ACC-QUICK-GS-KT
YAMAHA Bond No. 1215:
90890-85505
4 - 27
ENG
Adjust.
10 Nm (1.0 m · kg, 7.2 ft · lb)
®
:
- Quick Links:
- Engine
Hide quick links:
Advertisement
Table of Contents
