Yamaha WR250F(N) Owner's Service Manual page 502

Å
ı
Å
ı
FRONT BRAKE AND REAR BRAKE
5 - 18
2. Install:
Piston seal 1
Dust seal 2
WARNING
Always use new piston seals and dust
seals.
NOTE:
Fit the piston seals and dust seals onto the slot
on brake caliper correctly.
Å Front
ı Rear
3. Install:
Brake caliper piston 1
NOTE:
Apply the brake fluid on the piston wall.
CAUTION:
For the front brake caliper, install the pis-
ton with its depressed side a facing the
brake caliper. For the rear brake caliper,
install the piston
depressed side b facing the caliper.
Never force to insert.
Å Front
ı Rear
Front brake caliper
1. Install:
Pad support 1
Brake pad 2
Pad pin 3
NOTE:
Install the brake pads with their projections
a into the brake caliper recesses b.
Temporarily tighten the pad pin at this point.
CHAS
with its shallow