Display Storm-Constrain - HP 3600 v2 Series Command Reference Manual

Description
Use display port-group manual to display information about port groups.
If the all keyword is specified, this command displays the name and member Ethernet interfaces of each
port group on the switch.
If a port group is specified, this command displays its name and member Ethernet interfaces.
If you do not specify the all keyword or any port group name, the command displays the name of each
port group on the switch.
Examples
# Display the names of all port groups.
<Sysname> display port-group manual
The following manual port group exist(s):
group1
# Display detailed information about all port groups.
<Sysname> display port-group manual all
Member of group1:
Ethernet1/0/3
Ethernet1/0/6
Ethernet1/0/9
Member of group2:
None
# Display detailed information about the port group named group1.
<Sysname> display port-group manual name group1
Member of group1:
Ethernet1/0/3
Ethernet1/0/6
Ethernet1/0/9

display storm-constrain

Syntax
display storm-constrain [ broadcast | multicast | unicast ] [ interface interface-type interface-number ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
broadcast: Displays broadcast storm control settings and statistics.
multicast: Displays multicast storm control settings and statistics.
unicast: Displays unknown unicast storm control settings and statistics.
interface interface-type interface-number: Specifies an interface by its type and number with the
interface-type interface-number argument.
Ethernet1/0/4 Ethernet1/0/5
Ethernet1/0/7 Ethernet1/0/8
Ethernet1/0/4 Ethernet1/0/5
Ethernet1/0/7 Ethernet1/0/8
30
group2