Ike Nat-Keepalive; Ike Profile - HP 6125XLG Command Reference Manual

The supported maximum number of established IKE SAs depends on the device's memory space. Adjust
the maximum number of established IKE SAs to make full use of the device's memory space without
affecting other applications in the system.
Examples
# Set the maximum number of half-open IKE SAs to 200.
<Sysname> system-view
[Sysname] ike limit max-negotiating-sa 200
# Set the maximum number of established IKE SAs to 200.
<Sysname> system-view
[Sysname] ike limit max-sa 5000

ike nat-keepalive

Use ike nat-keepalive to set the NAT keepalive interval.
Use undo ike nat-keepalive to restore the default.
Syntax
ike nat-keepalive seconds
undo ike nat-keepalive
Default
The NAT keepalive interval is 20 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
seconds: Specifies the NAT keepalive interval in seconds, in the range of 5 to 300.
Usage guidelines
This command takes effect only for a device behind a NAT server. When the device resides behind a
NAT server, the IKE gateway behind the NAT server needs to send NAT keepalive packets to its peer IKE
gateway to keep the NAT session alive. For information about how to display the lifetime of NAT entries,
see Layer 3–IP Services Command Reference.
Examples
# Set the NAT keepalive interval to 5 seconds.
<Sysname> system-view
[Sysname] ike nat-keepalive 5

ike profile

Use ike profile to create an IKE profile and enter IKE profile view.
Use undo ike profile to delete an IKE profile.
292