Sa Duration - HP 6125XLG Command Reference Manual

# Delete the IKE SA with the connection ID 2.
<Sysname> reset ike sa 2
# Display the current IKE SAs.
<Sysname> display ike sa
Total IKE SAs:
Connection-ID
----------------------------------------------------------
1
Flags:
RD--READY ST--STAYALIVE RL--REPLACED FD—FADING TO—TIMEOUT

sa duration

Use sa duration to set the IKE SA lifetime for an IKE proposal.
Use undo sa duration to restore the default.
Syntax
sa duration seconds
undo sa duration
Default
The IKE SA lifetime is 86400 seconds.
Views
IKE proposal view
Predefined user roles
network-admin
Parameters
Seconds: Specifies the IKE SA lifetime in seconds, in the range of 60 to 604800.
Usage guidelines
If the communicating peers are configured with different IKE SA lifetime settings, the smaller one takes
effect.
Before an IKE SA expires, IKE negotiates a new SA. The new SA takes effect immediately after it is
negotiated. The old IKE SA will be cleared when it expires.
Examples
# Set the IKE SA lifetime to 600 seconds for IKE proposal 1.
<Sysname> system-view
[Sysname] ike proposal 1
[Sysname-ike-proposal-1] sa duration 600
Related commands
display ike proposal
1
Remote
202.38.0.2
Flag DOI
RD|ST IPSEC
305