Ipsec Transform-Set - HP 6125XLG Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
seconds: Specifies the IPsec SA idle timeout, in the range of 60 to 86400 seconds.
Usage guidelines
This function applies only to IPsec SAs negotiated by IKE.
The IPsec SA idle timeout can also be configured in IPsec policy view or IPsec policy template view, which
takes precedence over the global IPsec SA timeout.
Examples
# Set the IPsec SA idle timeout to 600 seconds.
<Sysname> system-view
[Sysname] ipsec sa idle-time 600
Related commands
display ipsec sa
•
• sa idle-time

ipsec transform-set

Use ipsec transform-set to create an IPsec transform set and enter IPsec transform set view.
Use undo ipsec transform-set to delete an IPsec transform set.
Syntax
ipsec transform-set transform-set-name
undo ipsec transform-set transform-set-name
Default
No IPsec transform set exists.
Views
System view
Predefined user roles
network-admin
Parameters
transform-set-name: Specifies a name for the IPsec transform set, a case-sensitive string of 1 to 63
characters.
Usage guidelines
An IPsec transform set, part of an IPsec policy, defines the security parameters for IPsec SA negotiation,
including the security protocol, encryption algorithms, and authentication algorithms.
Examples
# Create an IPsec transform set named tran1 and enter its view.
261