HP 6125XLG Command Reference Manual page 243

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-policy-template: Displays information about IPv6 IPsec policy templates.
policy-template: Displays information about IPv4 IPsec policy templates.
template-name: Specifies an IPsec policy template by its name, a case-sensitive string of 1 to 63
characters.
seq-number: Specifies an IPsec policy template entry by its sequence number. The value range is 1 to
65535.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPsec policy
•
templates.
If you specify an IPsec policy template name and a sequence number, this command displays
•
information about the specified IPsec policy template entry. If you specify an IPsec policy template
name without any sequence number, this command displays information about all IPsec policy
template entries with the specified name.
Examples
# Display information about all IPv4 IPsec policy templates.
<Sysname> display ipsec policy-template
-----------------------------------------------
IPsec Policy Template: template
-----------------------------------------------
---------------------------------
Sequence number: 1
---------------------------------
Description: This is policy template
Security data flow :
IKE profile:
Remote address: 162.105.10.2
Transform set:
IPsec SA local duration(time based): 3600 seconds
IPsec SA local duration(traffic based): 1843200 kilobytes
# Display information about all IPv6 IPsec policy templates.
<Sysname> display ipsec ipv6-policy-template
-----------------------------------------------
IPsec Policy Template: template6
-----------------------------------------------
---------------------------------
Sequence number: 1
None
testprop
234