Display Ipsec Profile - HP 6125XLG Command Reference Manual

---------------------------------
Description: This is policy template
Security data flow :
IKE profile:
Remote address: 200::1/64
Transform set: testprop
IPsec SA local duration(time based): 3600 seconds
IPsec SA local duration(traffic based): 1843200 kilobytes
Table 32 Command output
Field
IPsec Policy Template
Sequence number
Description
Security data flow
IKE profile
Remote address
Transform set
IPsec SA local duration(time based)
IPsec SA local duration(traffic based)
Related commands
ipsec { ipv6-policy | policy } isakmp template

display ipsec profile

Use display ipsec profile to display information about IPsec profiles.
Syntax
display ipsec profile [ profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
profile-name: Specifies an IPsec profile by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPsec profiles.
Examples
# Display information about all IPsec profiles.
None
Description
IPsec policy template name.
Sequence number of the IPsec policy template entry.
Description of the IPsec policy template.
ACL referenced by the IPsec policy template.
IKE peer referenced by the IPsec policy template.
Remote end IP address of the IPsec tunnel.
Transform set referenced by the IPsec policy template.
Time-based IPsec SA lifetime, in seconds.
Traffic-based IPsec SA lifetime, in kilobytes.
235