Primary Authentication (Hwtacacs Scheme View) - HP 6125XLG Command Reference Manual

Two accounting servers specified for a scheme, primary or secondary, cannot have identical IP address,
port number, and VPN settings.
If the specified server resides on an MPLS L3VPN, specify the VPN by using the vpn-instance
vpn-instance-name option. The VPN specified by this command takes precedence over the VPN specified
for the HWTACACS scheme.
You can remove an accounting server only when it is not used for user accounting. Removing an
accounting server affects only accounting processes that occur after the remove operation.
For security purposes, all shared keys, including shared keys configured in plain text, are saved in
ciphertext.
Examples
# Specify the primary accounting server with IP address 10.163.155.12, TCP port number 49, and
plaintext shared key 123456 for HWTACACS scheme test1.
<Sysname> system-view
[Sysname] hwtacacs scheme test1
[Sysname-hwtacacs-test1] primary accounting 10.163.155.12 49 key simple 123456
Related commands
• display hwtacacs scheme
key (HWTACACS scheme view)
•
• secondary accounting (HWTACACS scheme view)
vpn-instance (HWTACACS scheme view)
•

primary authentication (HWTACACS scheme view)

Use primary authentication to specify the primary HWTACACS authentication server.
Use undo primary authentication to remove the configuration.
Syntax
primary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple }
string | vpn-instance vpn-instance-name ] *
undo primary authentication
Default
No primary HWTACACS authentication server is specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary HWTACACS authentication server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary HWTACACS authentication server.
port-number: Specifies the service port number of the primary HWTACACS authentication server, a TCP
port number in the range of 1 to 65535. The default setting is 49.
63