Display Radius Scheme - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Parameters
data { byte | giga-byte | kilo-byte | mega-byte }: Specifies the unit for data flows, which can be byte,
kilobyte, megabyte, or gigabyte.
packet { giga-packet | kilo-packet | mega-packet | one-packet }: Specifies the unit for data packets,
which can be one-packet, kilo-packet, mega-packet, or giga-packet.
Usage guidelines
The command does not apply to 802.1X and MAC users, for whom the switch does not support traffic
accounting.
The data flow and packet measurement units for traffic statistics must be the same as configured on the
RADIUS accounting servers. Otherwise, accounting results might be incorrect.
Examples
# In RADIUS scheme radius1, set the data flow and packet measurement units for traffic statistics to
kilobyte and kilo-packet, respectively.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
Related commands

display radius scheme

display radius scheme
Use display radius scheme to display the configuration of RADIUS schemes.
Syntax
display radius scheme [ radius-scheme-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32
characters.
Usage guidelines
If no RADIUS scheme is specified, the command displays the configuration of all RADIUS schemes.
Examples
# Display the configuration of all RADIUS schemes.
<Sysname> display radius scheme
Total 1 RADIUS schemes
32