Syntax
ike profile profile-name
undo ike profile profile-name
Default
No IKE profile is configured.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name: Specifies an IKE profile name, a case-sensitive string of 1 to 63 characters.
Examples
# Create IKE profile 1 and enter its view.
<Sysname> system-view
[Sysname] ike profile 1
[Sysname-ike-profile-1]
ike proposal
Use ike proposal to create an IKE proposal and enter IKE proposal view.
Use undo ike proposal to delete an IKE proposal.
Syntax
ike proposal proposal-number
undo ike proposal proposal-number
Default
The system has an IKE proposal that is used as the default IKE proposal. This proposal has the lowest
priority and uses the following settings:
Encryption algorithm—DES-CBC in non-FIPS mode and AES-CBC- 1 28 in FIPS mode.
•
•
Authentication method—HMAC-SHA1.
Authentication algorithm—Pre-shared key authentication.
•
DH group—Group 1 in non-FIPS mode and group 14 in FIPS mode.
•
IKE SA lifetime—86400 seconds.
•
You cannot change the settings of the default IKE proposal.
Views
System view
Predefined user roles
network-admin
293