Password-Control Complexity - HP 6125XLG Command Reference Manual

Default
The default is 7 days.
Views
System view
Predefined user roles
network-admin
Parameters
alert-time: Specifies the number of days before a user password expires during which the user is notified
of the pending password expiration. The value range is 1 to 30.
Usage guidelines
FTP users can only have their passwords changed by the administrator. Therefore, this command is
effective only on non-FTP users.
Examples
# Configure the device to notify a user about pending password expiration 10 days before the user's
password expires.
<Sysname> system-view
[Sysname] password-control alert-before-expire 10
Related commands
display password-control

password-control complexity

Use password-control complexity to configure the password complexity checking policy.
Use undo password-control complexity to remove a password complexity checking item.
Syntax
password-control complexity { same-character | user-name } check
undo password-control complexity { same-character | user-name } check
Default
Both username checking and repeated character checking are disabled.
Views
System view
Predefined user roles
network-admin
Parameters
same-character: Refuses a password that contains any character repeated consecutively three or more
times. For example, the password aaabc is not complex enough.
user-name: Refuses a password that contains the username or the reverse of the username. For example,
if the username is 123, a password such as abc123 or 321df is not complex enough.
130