Local User Commands; Authorization-Attribute - HP 6125XLG Command Reference Manual

Default
An ISP domain is in active state.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting network
services.
Usage guidelines
By blocking an ISP domain, you disable offline users of the domain from requesting network services. The
online users are not affected.
Examples
# Place the ISP domain test to blocked state.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] state block
Related commands
display domain

Local user commands

authorization-attribute

Use authorization-attribute to configure authorization attributes for a local user or user group. After the
local user or a local user in the user group passes authentication, the device assigns these attributes to the
user.
Use undo authorization-attribute to restore the default.
Syntax
authorization-attribute { acl acl-number | idle-cut minute | user-role role-name | vlan vlan-id |
work-directory directory-name } *
undo authorization-attribute { acl | idle-cut | user-role role-name | vlan | work-directory } *
Default
No authorization ACL, idle timeout period, or authorized VLAN is configured for the local users.
FTP, SFTP, or SCP users are authorized access to the root directory of the device, but they do not have the
access permission.
The local users created by a network-admin or level- 1 5 user are assigned the network-operator user role.
19