Ike-Profile; Ipsec Anti-Replay Check - HP 6125XLG Command Reference Manual

[Sysname-ipsec-transform-set-tran1] esp encryption-algorithm aes-cbc-128
Related commands
ipsec transform-set

ike-profile

Use ike-profile to specify an IKE profile for an IPsec policy or IPsec policy template.
Use undo ike-profile to remove the configuration.
Syntax
ike-profile profile-name
undo ike-profile
Default
An IPsec policy or IPsec policy template does not reference any IKE profile, and the device selects an IKE
profile configured in system view for negotiation. If no IKE profile is configured, the global IKE settings
are used.
Views
IPsec policy view, IPsec policy template view
Predefined user roles
network-admin
Parameters
profile-name: Specifies an IKE profile by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
The IKE profile referenced by an IPsec policy or IPsec policy template defines the parameters used for IKE
negotiation.
An IPsec policy or IPsec policy template can reference only one IKE profile and they cannot reference any
IKE profile that is already referenced by another IPsec policy or IPsec policy template.
Examples
# Configure IPsec policy (policy1) to reference IKE profile (profile1).
<Sysname> system-view
[Sysname] ipsec policy policy1 10 isakmp
[Sysname-ipsec-policy-isakmp-policy1-10] ike-profile profile1
Related commands
ike profile

ipsec anti-replay check

Use ipsec anti-replay check to enable IPsec anti-replay checking.
Use undo ipsec anti-replay check to disable IPsec anti-replay checking.
Syntax
ipsec anti-replay check
249