Ipsec { Ipv6-Policy | Policy } Isakmp Template - HP 6125XLG Command Reference Manual

ipsec { ipv6-policy | policy } isakmp template

Use ipsec { ipv6-policy | policy } isakmp template to create an IKE-based IPsec policy by referencing an
IPsec policy template.
Use undo ipsec { ipv6-policy | policy } to delete the specified IPsec policy.
Syntax
ipsec { ipv6-policy | policy } policy-name seq-number isakmp template template-name
undo ipsec { ipv6-policy | policy } policy-name [ seq-number ]
Default
No IPsec policy is created.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy: Specifies an IPv6 IPsec policy.
policy: Specifies an IPv4 IPsec policy.
policy-name: Specifies a name for the IPsec policy, a case-sensitive string of 1 to 63 characters.
seq-number: Specifies a sequence number for the IPsec policy, in the range of 1 to 65535. A smaller
number indicates a higher priority.
isakmp template template-name: Specifies an IPsec policy template by its name, a case-sensitive string
of 1 to 64 characters. The specified IPsec policy template must exist.
Usage guidelines
Without the seq-number argument specified, the undo command deletes all entries of the specified IPsec
policy.
An interface referencing an IPsec policy that is configured by using an IPsec policy template cannot
initiate an SA negotiation, but it can respond to a negotiation request. The parameters not defined in the
template are determined by the initiator. When the remote end's information (such as the IP address) is
unknown, this method allows the remote end to initiate negotiations with the local end.
Examples
# Create an IPsec policy entry by referencing the IPsec policy template temp1, and specify the IPsec
policy name as policy2 and the sequence number as 200.
<Sysname> system-view
[Sysname] ipsec policy policy2 200 isakmp template temp1
Related commands
display ipsec { ipv6-policy | policy }
•
• ipsec { ipv6-policy-template | policy-template }
256