Reset Arp Detection Statistics - HP 6125XLG Command Reference Manual

Parameters
interface interface-type interface-number: Displays the ARP detection statistics of a specific interface.
Usage guidelines
This command displays numbers of packets discarded by user validity check and ARP packet validity
check. If you do not specify any interface, the command displays statistics for all interfaces.
Examples
# Display the ARP detection statistics for all the interfaces.
<Sysname> display arp detection statistics
State: U-Untrusted
ARP packets dropped by ARP inspect checking:
Interface(State)
BAGG1(U)
FGE1/1/1(U)
FGE1/1/2(U)
FGE1/1/3(U)
FGE1/1/4(U)
XGE1/0/17(U)
XGE1/0/18(U)
XGE1/0/19(U)
XGE1/0/20(U)
XGE1/1/5(U)
XGE1/1/6(U)
XGE1/1/7(U)
...
Table 29 Command output
Field
State
Interface(State)
IP
Src-MAC
Dst-MAC
Inspect

reset arp detection statistics

Use reset arp detection statistics to clear ARP detection statistics.
Syntax
reset arp detection statistics [ interface interface-type interface-number ]
T-Trusted
IP Src-MAC
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Description
State of an interface:
•
U—ARP untrusted interface.
•
T—ARP trusted interface.
Inbound interface of ARP packets. State specifies the port state, trusted or untrusted.
Number of ARP packets discarded due to invalid source and destination IP addresses.
Number of ARP packets discarded due to invalid source MAC address.
Number of ARP packets discarded due to invalid destination MAC address.
Number of ARP packets failed to pass user validity check.
Dst-MAC Inspect
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
217