Login-Dn - HP 6125XLG Command Reference Manual

Syntax
ldap server server-name
undo ldap server server-name
Default
No LDAP server exists.
Views
System view
Predefined user roles
network-admin
Parameters
server-name: LDAP server name, a case-insensitive string of 1 to 64 characters.
Examples
# Create an LDAP server ccc and enter its view.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc]
Related commands
display ldap scheme

login-dn

Use login-dn to specify the administrator DN.
Use undo login-dn to remove the configuration.
Syntax
login-dn dn-string
undo login-dn
Default
No administrator DN is specified.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
dn-string: Administrator DN for binding with the server, a case-insensitive string of 1 to 255 characters.
Usage guidelines
The administrator DN specified on the device must be consistent with the administrator DN configured on
the LDAP server.
If you change the administrator DN, the change is effective only for LDAP authentication that occurs after
your change.
80