Security-Policy-Server - HP 6125XLG Command Reference Manual

vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the secondary RADIUS
authentication server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters.
If the server is on the public network, do not specify this option.
Usage guidelines
Make sure that the port number and shared key settings of each secondary RADIUS authentication server
are the same as those configured on the corresponding server.
You can configure up to 16 secondary RADIUS authentication servers for a RADIUS scheme. With the
configuration, if the primary server fails, the device looks for a secondary server in active state (a
secondary RADIUS authentication server configured earlier has a higher priority) and tries to
communicate with it.
Two authentication servers specified for a scheme, primary or secondary, cannot have identical IP
address, port number, and VPN settings.
The shared key configured by this command takes precedence over that configured by using the key
authentication command.
If the specified server resides on an MPLS L3VPN, specify the VPN by using the vpn-instance
vpn-instance-name option. The VPN specified by this command takes precedence over the VPN
specified for the RADIUS scheme.
If you use the secondary authentication command to modify or delete a secondary authentication server
during an authentication process, communication with the secondary server times out, and the device
looks for an active server with the highest priority for authentication.
For security purposes, all shared keys, including shared keys configured in plain text, are saved in
ciphertext.
Examples
# For RADIUS scheme radius1, specify a secondary authentication server with the IP address 10.1 10.1.2
and the UDP port 1812.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary authentication 10.110.1.2 1812
# Specify two secondary authentication servers for RADIUS scheme radius2, with the server IP addresses
of 10.1 10.1.1 and 10.1 10.1.2, and the UDP port number of 1812.
<Sysname> system-view
[Sysname] radius scheme radius2
[Sysname-radius-radius2] secondary authentication 10.110.1.1 1812
[Sysname-radius-radius2] secondary authentication 10.110.1.2 1812
Related commands
display radius scheme
•
key (RADIUS scheme view)
•
primary authentication (RADIUS scheme view)
•
vpn-instance (RADIUS scheme view)
•

security-policy-server

Use security-policy-server to specify a security policy server.
48