Timer Realtime-Accounting (Radius Scheme View) - HP 6125XLG Command Reference Manual

Parameters
minutes: Specifies the server quiet period in minutes, in the range of 1 to 255.
Usage guidelines
Make sure the server quiet timer is set correctly. Too short a quiet timer might result in frequent
authentication or accounting failures because the device keeps attempting to communicate with an
unreachable server that is in active state.
Examples
# Set the quiet timer for the servers to 10 minutes.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer quiet 10
Related commands
display radius scheme

timer realtime-accounting (RADIUS scheme view)

Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
minutes: Specifies the real-time accounting interval in minutes, in the range of 0 to 60.
Usage guidelines
When the real-time accounting interval configured on the device is not zero, the device sends online user
accounting information to the RADIUS accounting server at the configured interval. When the real-time
accounting interval on the device is zero, the device sends online user accounting information to the
RADIUS accounting server at the real-time accounting interval configured on the server (if any) or does
not send online user accounting information.
Different real-time accounting intervals impose different performance requirements on the device and the
RADIUS server. A short interval helps improve accounting precision but requires many system resources.
Table 6 Recommended real-time accounting intervals
Number of users
1 to 99
Real-time accounting interval
3 minutes
52