Display Arp Source-Suppression; Arp Packet Rate Limit Commands; Arp Rate-Limit - HP 6125XLG Command Reference Manual

<Sysname> system-view
[Sysname] arp source-suppression limit 100
Related commands

display arp source-suppression.

display arp source-suppression
Use display arp source-suppression to display information about the current ARP source suppression
configuration.
Syntax
display arp source-suppression
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about the current ARP source suppression configuration.
<Sysname> display arp source-suppression
ARP source suppression is enabled
Current suppression limit: 100
Table 28 Command output
Field
Current suppression limit

ARP packet rate limit commands

arp rate-limit

Use arp rate-limit to enable ARP packet rate limit on an interface and configure the rate limit. Exceeded
packets will be discarded.
Use undo arp rate-limit pps to restore the default value of the ARP packet rate limit.
Use undo arp rate-limit to disable ARP packet rate limit function.
Syntax
arp rate-limit [ pps ]
undo arp rate-limit [ pps ]
Default
ARP packet rate limit function is enabled and the rate limit is 100 pps.
Description
Maximum number of unresolvable packets that can be received from a
host in 5 seconds.
208