Ssh2 Ipv6 - HP 6125XLG Command Reference Manual

faults, use the specified loopback interface as the source interface, and either IP address of the two
interfaces as the source IP address.
interface interface-type interface-number: Specifies a source interface by its type and number. The
primary IPv4 address of this interface is the source IP address to send packets.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
When the server adopts publickey authentication to authenticate a client, the client must get the local
private key for digital signature. Because publickey authentication uses either RSA or DSA algorithm, you
must specify a public key algorithm (by using the identity-key keyword) in order to get the correct data
for the local private key.
Examples
# Establish a connection to the IPv4 Stelnet server 3.3.3.3 and specify the public key of the server as
svkey. The Stelnet client uses publickey authentication. Use the following algorithms:
Preferred key exchange algorithm: dh-group14.
•
Preferred server-to-client encryption algorithm: aes128.
•
Preferred client-to-server HMAC algorithm: sha1.
•
• Preferred server-to-client HMAC algorithm: sha1-96.
Preferred compression algorithm between the server and client: zlib.
•
<Sysname> ssh2 3.3.3.3 prefer-kex dh-group14 prefer-stoc-cipher aes128 prefer-ctos-hmac
sha1 prefer-stoc-hmac sha1-96 prefer-compress zlib publickey svkey

ssh2 ipv6

Use ssh2 ipv6 to establish a connection to an IPv6 Stelnet server.
Syntax
In non-FIPS mode:
ssh2 ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type interface-number ]
[ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes256 | des }
| prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] * [ publickey keyname | source { interface interface-type interface-number
| ipv6 ipv6-address } ] *
In FIPS mode:
ssh2 ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type interface-number ]
[ identity-key rsa | prefer-compress zlib | prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac
{ sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac
{ sha1 | sha1-96 } ] * [ publickey keyname | source { interface interface-type interface-number | ipv6
ipv6-address } ] *
Views
User view
Predefined user roles
network-admin
194