Local-Identity - HP 6125XLG Command Reference Manual

undo keychain keychain-name
Default
No IKE keychain is specified for an IKE profile.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
keychain-name: Specifies an IKE keychain name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
An IKE profile can reference up to six IKE keychains. An IKE keychain specified earlier has a higher
priority.
Examples
# Specify IKE profile 1 for IKE keychain abc.
<Sysname> system-view
[Sysname] ike profile 1
[Sysname-ike-profile-1] keychain abc
Related commands
ike keychain

local-identity

Use local-identity to configure the local ID, the ID that the device uses to identify itself to the peer during
IKE negotiation.
Use undo local-identity to delete the local ID.
Syntax
local-identity { address { ipv4-address | ipv6 ipv6-address } | dn | fqdn [ fqdn-name ] | user-fqdn
[ user-fqdn-name ] }
undo local-identity
Default
No local ID is configured for an IKE profile, and an IKE profile uses the local ID configured in system view
(using the ike identity command). If no local ID is configured in system view either, the IP address of the
interface that the IPsec policy or IPsec policy template is applied to is used as the local ID.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
address { ipv4-address | ipv6 ipv6-address }: Uses an IPv4 or IPv6 address as the local ID.
296