Authentication Default - HP 6125XLG Command Reference Manual

local: Performs local accounting.
none: Does not perform accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
Accounting is not supported for login users who use FTP.
You can specify multiple default accounting methods, one primary and multiple backup methods. When
the primary method is invalid, the device attempts to use the backup methods in sequence. For example,
the accounting login radius-scheme radius-scheme-name local none command specifies a primary
default RADIUS accounting method and two backup accounting methods, local accounting and no
accounting. With this command, the device performs RADIUS accounting by default, performs local
accounting when the RADIUS server is invalid, and does not perform accounting when both of the
previous methods are invalid.
Examples
# Configure ISP domain test to use local accounting for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting login local
# Configure ISP domain test to use RADIUS scheme rd for login user accounting and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting login radius-scheme rd local
Related commands
accounting default
•
hwtacacs scheme
•
• local-user
radius scheme
•

authentication default

Use authentication default to specify the default authentication method for an ISP domain.
Use undo authentication default to restore the default.
Syntax
In non-FIPS mode:
authentication
radius-scheme-name ] [ local ] [ none ] | ldap-scheme ldap-scheme-name [ local ] [ none ] | local [ none ]
| none | radius-scheme radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ]
[ none ] }
undo authentication default
In FIPS mode:
default { hwtacacs-scheme hwtacacs-scheme-name
5
[ radius-scheme