Sftp Client Ipv6 Source; Sftp Client Source - HP 6125XLG Command Reference Manual

sftp client ipv6 source

Use sftp client ipv6 source to specify the source IPv6 address or source interface for the SFTP client.
Use undo sftp client ipv6 source to remove the configuration.
Syntax
sftp client ipv6 source { interface interface-type interface-number | ipv6 ipv6-address }
undo sftp client ipv6 source
Default
The SFTP client uses the IPv6 address of the interface specified by the route of the device to access the
SFTP server.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies the IPv6 address of the interface which matches the
destination address of the outbound packets using the longest match criteria as the source IPv6 address.
The interface-type interface-number argument specifies a source interface by its type and number.
ipv6 ipv6-address: Specifies a source IPv6 address.
Usage guidelines
The SFTP client uses the specified source IPv6 address to communicate with the server.
If you execute the sftp client ipv6 source command multiple times, the most recent configuration takes
effect.
If you use the sftp ipv6 command to connect to an SFTP server and specify another source IPv6 address,
the SFTP client uses the new source IPv6 address for the current connection instead of that specified by
the sftp client ipv6 source command.
The source address specified by the sftp client ipv6 source command applies to all SFTP connections, but
the source address specifies by the sftp ipv6 command applies only to the current connection.
Examples
# Specify the source IPv6 address for the SFTP client as 2:2::2:2.
<Sysname> system-view
[Sysname] sftp client ipv6 source ipv6 2:2::2:2
Related commands
display sftp client source

sftp client source

Use sftp client source to specify the source IPv4 address or source interface for the SFTP client.
Use undo sftp client source to remove the configuration.
187