Reset Ike Sa - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Parameters
proposal-number&<1-6>: Specifies up to six IKE proposal numbers, each in the range of 1 to 65535. An
IKE proposal specified earlier has a higher priority.
Usage guidelines
When acting as the initiator, the device sends the specified IKE proposals to its peer for IKE negotiation.
When acting as the responder, the device uses the IKE proposals configured in system view to match the
IKE proposals received from the initiator.
Examples
# Specify IKE proposal 10 for IKE profile prof1.
<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] proposal 10
Related commands
ike proposal

reset ike sa

Use reset ike sa to delete IKE SAs.
Syntax
reset ike sa [ connection-id connection-id ]
Views
User view
Predefined user roles
network-admin
Parameters
connection-id connection-id: Specifies the connection ID of the IKE SA to be cleared, in the range 1 to
2000000000.
Usage guidelines
When you delete an IKE SA, the device automatically sends a notification to the peer.
Examples
# Display the current IKE SAs.
<Sysname> display ike sa
Total IKE SAs:
Connection-ID
----------------------------------------------------------
1
2
Flags:
RD--READY ST--STAYALIVE RL--REPLACED FD—FADING TO—TIMEOUT
2
Remote Flag
202.38.0.2 RD|ST
202.38.0.3 RD|ST
DOI
IPSEC
IPSEC
304