Domain Default Enable; State (Isp Domain View) - HP 6125XLG Command Reference Manual

domain default enable

Use domain default enable to specify the default ISP domain. Users without any domain name included
in the usernames are considered in the default domain.
Use undo domain default enable to restore the default.
Syntax
domain default enable isp-name
undo domain default enable
Default
The default ISP domain is the system-defined ISP domain system.
Views
System view
Predefined user roles
network-admin
Parameters
isp-name: ISP domain name, a case-insensitive string of 1 to 24 characters.
Usage guidelines
There can be only one default ISP domain.
The specified ISP domain must already exist.
To delete the ISP domain that is used as the default ISP domain, you must change it to a non-default ISP
domain first by using the undo domain default enable command.
Examples
# Create an ISP domain named test, and configure it as the default ISP domain.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] quit
[Sysname] domain default enable test
Related commands
display domain
•
• domain

state (ISP domain view)

Use state to set the status of an ISP domain.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
18