Table of Contents
Advertisement
Advanced Setup
The following sections will explain more about IP Filter/Firewall Setup
using the Web Configurator. The Filter has 12 filter sets with 7 filter
rules for each set. There are a total of 84 filter rules for the IP Filter/
Firewall Setup. By default, the Call Filter rules are defined in Filter
Set 1 and the Data Filter rules are defined in Filter Set 2.
General Setup: Some general settings are available from this
link.
Filter Setup: Here there are 12 filter sets for IP Filter configu-
rations.
Set to Factory Default: Click here to restore the filter rules to
default values.
5.6.2 General Setup
On the General Setup page you can enable/disable the Call Filter or
Data Filter and assign a Start Filter Set for each, configure the log
settings, and set a MAC address for the logged packets to be dupli-
cated to.
5-16
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2200 Series and is the answer not in the manual?
Questions and answers