Table of Contents
Advertisement
Installation & Setup
2.3.2 Configuring the TCP/IP Protocol
1. On the Network dialog box Configuration card, select TCP/IP
and then click "Properties". The TCP/IP Properties dialog box
will open.
2. On the IP Address tab, click "Obtain an IP address auto-
matically". As the DHCP (Dynamic Host Configuration Proto-
col) server built into the router is enabled by default, your com-
puter will get an IP address, subnet mask, and other related IP
network settings from the router.
3. On the DNS Configuration tab, click "Disable DNS".
2-9
Advertisement
Table of Contents
