Table of Contents
Advertisement
Getting Started
1.1 Introduction
The Vigor2200 series of routers is composed of the Vigor2200, the
Vigor2200X, and the Vigor2200E. The Vigor2200E has no ISDN
BRI interface. Therefore, no ISDN functions are available for the
Vigor2200E and parts of this manual referring to such functions will
not apply to the Vigor2200E.
From a technical point of view, the Vigor2000 and Vigor2200X are
broadband DSL/Cable routers within another WAN interface ---ISDN
BRI. The interface offers traditional ISDN functions, such as remote
access, LAN-to-LAN access, Virtual TA applications, and ISDN dial-
backup. The Vigor2200E is a pure Ethernet-to-Ethernet router.
The Vigor2200 series routers provide multiple users with efficient and
reliable access over a single ISDN, DSL line, or Cable Modem serv-
ice to the Internet and corporate LAN for using E-mail, sharing docu-
ments, Web surfing, file transfers, etc.
The broadband access protocol supports PPPoE, PPTP, Dynamic IP
(DHCP) and Static IP. These protocols comply with worldwide Ethernet-
based DSL/Cable Modem standards.
For traditional ISDN users, the Vigor2200 and Vigor2200X feature a
built-in Virtual TA (Remote CAPI) server which can operate as a CAPI-
based ISDN TA for LAN users. To run FAX transmission or data trans-
fer services, users need to install a Virtual TA client driver on the PCs
and use third-party CAPI-based software .
1-2
Advertisement
Table of Contents
