Table of Contents
Advertisement
2.4 Using the Smart Start Wizard
The Smart Start Wizard will guide you through using the Web
Configurator or Telnet Terminal (command-line based management).
Also, if your currently installed network is not located in the 192.168.1.x
IP range, the wizard will find the router and change the router's default
IP address and IP mask to match the current network.
If you are familiar with using a web browser (Microsoft Internet
Explorer, Netcape Communicator, etc.) or telnet client software,
you may jump directly to the next section (page 2-18). We sug-
gest you use the most up-to-date version of your web browser.
Installing the Router Tools
1. Insert the CD supplied with the router into the CD-ROM drive.
The auto-run CD will display the main menu.
Note:
If auto-run fails to start the installation program. Click
autostart.exe on the root directory of the CD to start the
program.
2. Click "Router Tools" and select the OS platform you wish to
install to. The Router Tools utilities include the Firmware Up-
grade Utility, and the Smart Start Wizard.
Using the Wizard
1. Click "Start" > "Programs" > "Router Tools" > "Smart Start
Wizard".
Installation & Setup
2-13
Advertisement
Table of Contents
