Draytek Vigor2110 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. Draytek Manuals
  4. Network Router
  5. Vigor2110 Series
  6. Quick start manual
Draytek Vigor2110 Series Quick Start Manual

Draytek Vigor2110 Series Quick Start Manual

Vigor2110 series broadband firewall router
Hide thumbs Also See for Vigor2110 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Start Manual
Vigor2110 Series
Broadband Firewall Router

Quick Start Guide

Version: 1.0
Date: 2008/09/01
i

Advertisement

Table of Contents
loading

Related Manuals for Draytek Vigor2110 Series

Summary of Contents for Draytek Vigor2110 Series

  • Page 1: Quick Start Guide

    Vigor2110 Series Broadband Firewall Router Quick Start Guide Version: 1.0 Date: 2008/09/01...

  • Page 2: Copyright Information

    Web registration is preferred. You can register your Vigor router via Owner http://www.draytek.com. Firmware & Tools Due to the continuous evolution of DrayTek technology, all routers will be Updates regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.

  • Page 3: European Community Declarations

    No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2110 Series Router DrayTek Corp. declares that Vigor2110 Series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B.

  • Page 4: Table Of Contents

    1. Introduction......................1 1.1 Panel Explanation ........................2 1.1.1 For Vigor2110 ....................... 2 1.1.2 For Vigor2110n ......................4 1.1.3 For Vigor2110Vn ......................6 1.2 Package Content........................8 2. Installing Your Router................... 9 2.1 Hardware Installation........................9 Stand Installation........................10 2.2 Printer Installation........................11 3.

  • Page 5: Introduction

    Vigor2110 ‘V’ models provide two analogue phone connectors and one line port. It supports multiple SIP registrars with high flexible configuration and call handing options. In addition, Vigor2110 series supports USB interface for connecting USB printer to share printer or USB storage device for sharing files. Vigor2110 series provides two-level management to simplify the configuration of network connection.

  • Page 6: Panel Explanation

    Status Explanation Blinking The router is powered on and running (Activity) normally. The router is powered off. The profile(s) of CSM (Content Security Management) for IM/P2P, URL/Web Content Filter application can be enabled from Firewall >>General Setup. (Such profile must be established under CSM menu).
  • Page 7 Interface Description Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.

  • Page 8: For Vigor2110

    Status Explanation Blinking The router is powered on and running (Activity) normally. The router is powered off. WLAN Wireless access point is ready. Blinking It will blink while wireless traffic goes through. The WAN port is connected. Blinking It will blink while transmitting data. The port is connected.
  • Page 9 Interface Description Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.

  • Page 10: For Vigor2110Vn

    Status Explanation Blinking The router is powered on and running (Activity) normally. The router is powered off. WLAN Wireless access point is ready. Blinking It will blink while wireless traffic goes through. The WAN port is connected. Blinking It will blink while transmitting data. The port is connected.
  • Page 11 Interface Description Line Connector for PSTN life line. Phone2/Phone1 Connector of analog phone for VoIP communication Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button.

  • Page 12: Package Content

    Quick Start Guide RJ-45 Cable (Ethernet) Antenna (n models) Stand The type of the power adapter depends on the country that the router will be installed. * The maximum power consumption is 17-23 Watt. UK-type Power Adapter EU-type Power Adapter USA/Taiwan-type Power Adapter AU/NZ-type Power Adapter...

  • Page 13: Installing Your Router

    4 PCs directly. Connect Phone port to a conventional analog telephone. Connect detachable antennas to the router for Vigor2110 series (n model). Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity.

  • Page 14: Stand Installation

    The Vigor2110 must be placed erectly. Therefore you have to install a stand onto the router to make it standing firmly. Please follow the figures listed below to finish the installation.

  • Page 15: Printer Installation

    You can install a printer onto the router for sharing printing. All the PCs connected this router can print documents via the router. The example provided here is made based on Windows XP/2000. For Windows 98/SE/Vista, please visit www.draytek.com. Before using it, please follow the steps below to configure settings for connected computers (or wireless clients).
  • Page 16 Open File->Add a New Computer. A welcome dialog will appear. Please click Next. Click Local printer attached to this computer and click Next. In this dialog, choose Create a new port Type of port and use the drop down list to select Standard TCP/IP Port.
  • Page 17 In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port name. Then, click Next. Click Standard and choose Generic Network Card. Then, in the following dialog, click Finish.
  • Page 18 Now, your system will ask you to choose right name of the printer that you installed onto the router. Such step can make correct driver loaded onto your PC. When you finish the selection, click Next. 10. For the final stage, you need to go back to Control Panel-> Printers and edit the property of the new printer you have added.
  • Page 19 If you do not know whether your printer is supported or not, please visit www.draytek.com to find out the printer list. Open Support Center->FAQ->Sort by product; select the model of the router and click on it; find out the link of Printer Server FAQ;...

  • Page 21: Configuring Web

    To access Internet, please finish basic configuration after completing the hardware installation. Make sure your PC connects to the router correctly. Notice: You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of Vigor router 192.168.1.1.

  • Page 22: Basic Configuration

    The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web Configurator. Open a web browser on your PC and type http://192.168.1.1. The system will ask you to type username/password.
  • Page 23 Enter the login password on the field of New Password and retype it on the field of Retype New Password. Then click Next to continue. After restarting the router, new password must be typed for accessing into router web page. On the next page as shown below, please select the appropriate Internet access type according to the information from your ISP.
  • Page 24 PPPoE: if you click PPPoE as the protocol, please manually enter the Username/Password provided by your ISP. Then click Next. PPTP: if you click PPTP, you will get the following page. Please type in all the information originally provided by your ISP. Then click Next for next step.
  • Page 25 Static IP: if you click Static IP, you will get the following page. Please type in the IP address information originally provided by your ISP. Then click Next for next step. DHCP: if you click DHCP, you will get the following page. Simply click Next to continue.

  • Page 27: Wireless Configuration

    For the user of Vigor2110, please skip this section. For operating Vigor2110n/Vn well, it is necessary for you to set the wireless LAN settings for using wireless function. Please read the following section carefully for configuring the settings for this router. (The default value of Frequency Domain was set by factory depends on the reselling region.) In an Infrastructure Mode of wireless network, Vigor wireless router plays a role as an...
  • Page 28 (11b+11g), Mixed (11g+11n) and Mixed (11b+11g+11n) stations simultaneously. Simply choose Mix (11b+11g+11n) mode. Type in the name of the SSID. The default name for SSID is DrayTek. We suggest you change it to a particular name for your necessity. SSID (Service Set Identifier) - It is used to name the wireless LAN for this router, and it must have the same content in client PC/notebook wireless card(s).

  • Page 29: Security Settings

    On the Wireless LAN group, select Security Settings. Select an appropriate encryption mode to improve the security and privacy of your wireless data packets. Disable Turn off the encryption mechanism. For the security of your router, please select any one of the encryption mode here. Accepts only WEP clients and the encryption key should be entered in WEP Key.
  • Page 30 As to WEP encryption, select 64-bit or 128-bit as the encryption mode. For 64bits WEP key, type in 5 ASCII characters or 10 hexadecimal digitals leading by 0x, for example, ABCDE or 0x4142434445. And for 128bits WEP key, type in 13 ASCII characters or 26 hexadecimal digits leading by 0x, for example, ABCDEFGHIJKLM or 0x4142434445464748494A4B4C4D.

  • Page 31: Trouble Shooting

    This section will guide you to solve abnormal situations if you cannot access into the Internet after installing the router and finishing the web configuration. Please follow sections below to check your basic installation status stage by stage. Checking if the hardware status is OK or not. Checking if the network connection settings on your computer are OK or not.
  • Page 32 The example is based on Windows XP. As to the examples for other operation systems, please refer to the similar steps or find support notes in www.draytek.com. Go to Control Panel and then double-click on Network Connections. Right-click on Local Area Connection and click on Properties.
  • Page 33 Select Obtain an IP address automatically and Obtain DNS server address automatically. Double click on the current used MacOs on the desktop. Open the Application folder and get into Network. On the Network screen, select Using DHCP from the drop down list of Configure IPv4.

  • Page 34: Pinging The Router From Your Computer

    The default gateway IP address of the router is 192.168.1.1. For some reason, you might need to use “ping” command to check the link status of the router. The most important thing is that the computer will receive a reply from 192.168.1.1. If not, please check the IP address of your computer.

  • Page 35: Checking If The Isp Settings Are Ok Or Not

    Open Internet Access page and then check whether the ISP settings are set correctly. Click PPPoE/PPPoA/MPoA/Multip-PVCs link to review the settings that you configured previously. Check if the Enable option is selected. Check if Username and Password are entered with correct values that you got from your ISP.
  • Page 36 Check if the Enable option for Broadband Access is selected. Check if WAN IP Network Settings is set appropriately. Check if IP Address, Subnet Mask and Gateway are set correctly (must identify with the values from your ISP) if you choose Specify an IP address. Check if the Enable option for PPTP Link is selected.

  • Page 37: Backing To Factory Default Setting If Necessary

    Check if WAN IP Network Settings are set properly. If you select Specify an IP address, you have to type in the values of IP Address and Subnet Mask manually. Be sure the values that you type identify with the values from your ISP. Sometimes, a wrong connection can be improved by returning to the default settings.

  • Page 38: Contacting Your Dealer

    After restore the factory default setting, you can configure the settings for the router again to fit your personal request. If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com.

This manual is also suitable for:

Vigor2110nVigor2110vn

Table of Contents