Table of Contents
Advertisement
Troubleshooting & FAQ
Renewing the IP Address
Type "ip dhcpc renew" to get a new IP address from the cable
service provider.
Viewing the WAN Status
Type "ip dhcpc status" to show the status of the DHCP client for the
WAN interface.
Viewing DHCP Logs
In some special cases, you may want to capture the detailed DHCP
messages sent between the WAN interface and the cable head-end
access server. Type "log -i" to dump these DHCP exchanged mes-
sages. Note that the DHCP client messages will be shown using the
"log -i" command when the LAN2/WAN interface has been configured
8-8
Advertisement
Table of Contents
