Table of Contents
Advertisement
Remote Access
Callback Function (CBCP)
The callback function is implemented by the CBCP protocol
which is part of the PPP protocol suite.
Require Remote to Callback: Inactive by default. When
active, the router exchanges connection information with the
remote router and requires the remote router to call back to
make a connection.
Provide ISDN Number to Remote: In some cases, the re-
mote router requires the ISDN number for calling back. Check
here to allow the local router to send the ISDN number to the
remote router.
Dial-In Settings
Username: Specifies a username to authenticate the dial-in
router.
Password: Specifies a password to authenticate the dial-in
router.
Enable CLID Authentication: Limits the dial-in router to call-
ing from a specific ISDN number.
Peer ISDN Number: If CLID Authentication is enabled, enter
the remote router's ISDN number in this field
Link Type: Refer to Dial-Out Settings.
PPP Authentication: Refer to Dial-Out Settings.
Callback Function (CBCP)
Enable Callback Function: Checking here allows this router
to accept requests from a remote router for call back.
4-14
Advertisement
Table of Contents
