Table of Contents
Advertisement
Access Control
Broadband Access: Select "Enable" to turn on the broadband
access capability.
ISDN DIAL Backup Setup
This item will be described in more detail in section 3.4.5
LAN2/WAN IP Network Settings
Specify an IP address: As we are using a static IP, you have
to select the option to specify an IP Address, Subnet Mask,
and Gateway IP Address.
Click "OK".
Note:
The router should be restarted to allow the settings to
take effect.
3.4.4 Using a Dynamic IP (DHCP Client) with a Cable Modem
This application is mostly used by Cable ISPs. Click "Internet Ac-
cess Setup" > "Static or Dynamic IP" to enter the setup page.
Basic Setup & Internet Access
3-19
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2200 Series and is the answer not in the manual?
Questions and answers