Table of Contents
Advertisement
Pass If No Further Match: A packet matching the rule,
and that does not match further rules, will be passed
through.
Branch to Other Filter Set: If the packet matches the filter
rule, the next filter rule will branch to the specified filter set.
Duplicate to LAN: If you want to log the matched packets to
another network device, check this box to enable it. The MAC
Address is defined in "General Setup" > "MAC Address for
Logged Packets Duplication" (see page 5-17).
Log: Check this box to enable the log function. Use the Telnet
command "log –f" to view the logs.
Direction: Sets the direction of packet flow. For the Call Filter,
this setting is irrelevant.
Advanced Setup
5-21
Advertisement
Table of Contents
