Table of Contents
Advertisement
The maximum number of active clients is also 2.
4. Before you set up the Virtual TA, you must set the
correct country code. Click "ISDN Setup" in the Basic
Setup group.
As the following application chart shows, the Virtual TA client can
make an outgoing call or accept an incoming call to/from a peer FAX
machine or ISDN TA etc.
6.2 Installing a Virtual TA Client
1. Insert the CD-ROM supplied with your Vigor2200, or directly dou-
ble-click the installer file. Vsetup95.exe is for Windows 95 OSR2.1
or higher, Vsetup98.exe is for Windows 98, 98SE and Me, and
Vsetup2k.exe is for Windows 2000.
2. Follow the installer's on-screen instructions. The last step requires
you to restart your computer. Click "OK" to restart.
3. After the computer restarts, you will see a VT icon on the taskbar
(usually in the bottom-right of the screen, near the clock) as shown
below.
Virtual TA Application
6-3
Advertisement
Table of Contents
