Table of Contents
Advertisement
Advanced Setup
Specify a phone number in the Remote Activation field.
If the router accepts a call from the number 12345678, it will discon-
nect immediately and dial to the ISP. Note that "Internet Access
Setup" > "Dialling to a Single ISP" should be preset properly.
5.2 Call Control Setup
On the "Call Control and PPP/MP Setup" setup page, you will see
Dial Retry and Dial Delay Interval.
These two parameters set global settings for ISDN dialup access.
Dial Retry: Specifies the dial retry counts per triggered packet.
A triggered packet is any packet whose destination is outside
the local network. The default settings is no dial retry. If set to
5, for each triggered packet, the router will dial 5 times until it is
connected to the ISP or remote access router.
Dial Delay Interval: Specifies the interval between dialup
retrys. By default, the interval is 0 seconds.
5.3 Configuring the BOD Parameters
BOD stands for bandwidth-on-demand for Multiple-Link PPP (ML-PPP
or MP). Click "Call Control and PPP/MP Setup" to see the follow-
ing settings.
5-4
Advertisement
Table of Contents
