Table of Contents
Advertisement
Advanced Setup
Note:
The filter log will be displayed on the Telnet terminal when
you type the "log -f" command.
MAC Adddress for Packet Duplication: Logged packets may
also be logged to another location via Ethernet. If you want to
duplicate logged packets from the router to another network
device, you must enter the other devices' MAC Address (HEX
Format). Type "0" to disable the feature (also see "Duplicate to
LAN" on page 5-21). The feature will be helpful under Ethernet
environments.
5.6.3 Editing the Filter Sets
Comments: Enter filter set comments/description. Maximum
length is 22 characters.
5-18
Advertisement
Table of Contents
