Table of Contents
Advertisement
Installation & Setup
Your particular system will be different from the screen shown here.
Check that you have an Ethernet network card installed. If not, refer
to the card manufacturers documentation and install the card and
drivers.
If your card is installed,
1. Click the "Add" button. The Select Network Component Type
dialog box will open. The box will show four options: Client,
Adapter, Protocol, Service.
2. Select Protocol and click the "Add" button. The Select Net-
work Protocol dialog box will open.
3. Select Microsoft in the left scrolling window, then select TCP/
IP in the right, and click "OK". You will be returned to the
Network dialog box.
2-8
Advertisement
Table of Contents
