Table of Contents
Advertisement
Basic Setup & Internet Access
Click "Internet Access Setup" > "PPPoE" to enter the setup page.
PPPoE Setup
PPPoE Link: Check "Enable" to enable the PPPoE client
protocol on the LAN2 interface.
ISP Access Setup
ISP Name: Enter the ISP name.
Username: Enter the ISP supplied username.
Password: Enter the ISP supplied password.
ISDN Dial Backup Setup
This item will be described in more detail in section 3.4.5.
PPP/MP Setup
PPP Authentication: Select "PAP or CHAP" for widest
compatibility.
Idle Timeout: Idle timeout means the router will disconnect
after being idle for a preset amount of time. The default is 180
3-14
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2200 Series and is the answer not in the manual?
Questions and answers