Table of Contents
Advertisement
Advanced Setup
5.6.4 Editing the Filter Rules
Click the Filter Rule index button to enter the Filter Rule setup page
for each filter. The following explains each configurable item in detail.
Comments: Enter filter set comments/description. Maximum
length is 14 characters.
Check to enable the Filter Rule: Enables the filter rule.
Pass or Block: Specifies the action to be taken when packets
match the rule.
Block Immediately: Packets matching the rule will be
dropped immediately.
Pass Immediately: Packets matching the rule will be
passed immediately.
Block If No Further Match: A packet matching the rule,
and that does not match further rules, will be dropped.
5-20
Advertisement
Table of Contents
