Table of Contents
Advertisement
Access Control
Broadband Access: Select "Enable" to turn on the broadband
access capability.
ISDN Dial Backup Setup
This item is described in more detail in section 3.4.5
LAN2/WAN IP Network Settings
Obtain an IP address automatically: The option must be
enabled.
Router Name: Depending on your Cable ISP this option may
or may not be left blank. Some ISPs require this name for
access authentication.
Domain Name: Depending on your Cable ISP this field may
or may not be left blank.
Default MAC Address & Specify a MAC Address: These
two options are mutually exclusive. Some Cable ISPs use a
specific MAC address for access authentication. In such cases
you need to check the "Specify a MAC Address" box and
enter the MAC address in the MAC Address fields. The Default
MAC Address of the router is the MAC address assigned by
DrayTek.
Click "OK" and restart the router to allow the settings to take
affect.
Note:
In the most cases, the only setting you need make is to
check "Obtain an IP address automatically".
Basic Setup & Internet Access
3-21
Advertisement
Table of Contents
