Table of Contents
Advertisement
Getting Started
Vigor2200X:
LED Indicators
As shown above, there are 11 LEDs on the front panel. Reading from
left to right, they are marked ACT, LNK, B1, B2, Backup, WAN,
Broadband, P1, P2, P3 and P4. Their functions are as follows:
ACT(Activity)
Blinks when power is supplied to the router and the router software
is running normally.
ISDN Group:
LNK (Link)
ON when the ISDN network is correctly setup.
Note:
For some NT-1 boxes, the ISDN LNK LED will go OFF
when the ISDN line has been idle for a while. When the
router is dialling or answering a call, it should be ON
again.
1-8
Advertisement
Table of Contents
