Table of Contents
Advertisement
Advanced Setup
For LAN1:
Click "LAN1 TCP/IP and DHCP Setup" to configure your LAN1 inter-
face for IP routing.
Check "Enable" and assign 192.168.100.1 in the 2nd IP Address
field, 255.255.255.0 in the 2nd Subnet Mask field. You now have a
routeable network 192.168.100.0/24 connected on the LAN1 inter-
face.
For LAN2(WAN):
To configure the LAN2(WAN), on the Main Setup Menu click "Internet
Access Setup" > "Static or Dynamic IP" to enter the setup page.
Note that Broadband Access is enabled and we assigned LAN2(WAN)
a static IP, 192.168.200.1, with a subnet mask of 255.255.255.0, and
a default gateway of 192.168.200.254. The default gateway is a next
hop router connected to another IP network, 192.168.201.0/24. In
5-11
Advertisement
Table of Contents
