Table of Contents
Advertisement
Remote Access
4.3 LAN-to-LAN Access
The following sections are based on the network layout above to de-
scribe how to set up a LAN-to-LAN profile to connect two private net-
works. In the above network layout, the private network 192.168.1.0/
24 is located at head office, the off-site branch office's network is
192.168.2.0/24.
Before you begin to setup a LAN-to-LAN profile for each network, you
should gather the information shown in the following table.
4-8
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2200 Series and is the answer not in the manual?