Table of Contents
Advertisement
Factory Default Settings:
Router's Default IP Network Settings:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
Start IP Address: 192.168.1.10
IP Pool Counts: 50
Web Configurator:
Username: admin
Password: <blank>
Note: Blank means no password required.
Telnet Console:
Password: <blank>
Note: Blank means no password required.
Management from the Internet:
Not allow.
The following items apply only to the Vigor2200 and Vigor2200X.
Virtual TA Server: Enabled
Remote Dial-In Server: Disabled
Assigned IP Address: 192.168.1.200
Installation & Setup
2-3
Advertisement
Table of Contents
