Table of Contents
Advertisement
means it can be used for outgoing and incoming access. Dial-
Out means it can only be used for outgoing access. Dial-In
allows only incoming access.
Idle Timeout: By default, set to 300 seconds. If the profiles
connection is idle for over the limit set by the timer, the router
will drop the connection.
Dial-Out Settings
Username: Specifies a username for authentication by the
remote router.
Password: Specifies a password for authentication by the re-
mote router.
Dial Number: Specifies the destination ISDN number for dialup.
Link Type: Indicates the dial-out link type.
Disable: Deactivates the dial-out action.
64k bps: Specifies the outgoing connection speed is
restricted to 64kbps (one B-channel).
128k bps: Specifies the outgoing connection speed is
128kbps (two B-channels).
BOD: Specifies the link type to be dynamic bandwidth
control (Bandwidth-on-Demand).
PPP Authentication: Specifies the authentication method.
Normally set to PAP/CHAP for the widest compatibility.
VJ Compression: VJ Compression means TCP/IP protocol
header compression. Normally set to "Yes" to improve band-
width utilization.
Remote Access
4-13
Advertisement
Table of Contents
